您的位置:山东大学 -> 科技期刊社 -> 《山东大学学报(理学版)》

J4 ›› 2013, Vol. 48 ›› Issue (05): 29-33.

• 前沿进展 • 上一篇    下一篇

聚醚接枝聚羧酸系减水剂合成工艺研究

邵国俊,茹淼焱*,孙雪莹   

  1. 山东大学化学与化工学院, 山东 济南 250100
  • 收稿日期:2012-10-09 出版日期:2013-05-20 发布日期:2013-05-10
  • 通讯作者: 茹淼焱(1963-),男,高级工程师,主要从事应用化学方面的研究. Email:ru1977@sdu.edu.cn
  • 作者简介:邵国俊(1988- ),女,硕士研究生,主要从事高分子材料方面的研究. Email:spring880318@163.com

Study on synthesis process of polyether grafted polycarboxylate based superplasticizer

SHAO Guo-jun, RU Miao-yan*, SUN Xue-ying   

  1. School of Chemistry and Chemical Engineering, Shandong University, Jinan 250100, Shandong, China
  • Received:2012-10-09 Online:2013-05-20 Published:2013-05-10

摘要:

采用可聚合单体直接共聚法,以过硫酸铵 (APS) 为引发剂,选用丙烯酸(AA)、甲基丙烯磺酸钠(SMAS)、烯丙基聚氧乙烯醚(JFB-23)为单体合成了聚羧酸系减水剂,考察了SMAS、AA、JFB23物质的量之比、引发剂用量、聚合温度、滴加时间和保温时间对合成的聚羧酸减水剂性能的影响。减水剂的结构和分子质量分别用FTIR和GPC进行表征。结果表明最佳实验条件为SMAS、AA、JFB23的物质的量之比为0.8∶3∶1,引发剂用量为单体总质量的4%,聚合温度为85℃,滴加时间为2h,保温时间2.5h。

关键词: 聚羧酸系减水剂;烯丙基聚氧乙烯醚(JFB-23);水泥净浆流动度

Abstract:

The polycarboxylate based superplasticizer was synthesized by water solution copolymerization of acrylic acid (AA), sodium methyl acryl sulfonate (SMAS) and allyl polyethylene glycol (JFB-23). Ammonium persulfate (APS) was used as the initiator. The mole ratio of monomers, the dosage of initiator, the polymerization temperature and the reaction time on the performance of polycarboxylate based superplasticizer were investigated. The structure and molecular mass of superplasticizer were characterized by FTIR and GPC. The results indicated that the polycarboxylate based superplasticizer with better performance could be obtained when n(AA)∶n(SMAS)∶n(JFB-23)=08∶3∶1, the dosage of initiator was 4 % of the monomer weight, the polymerization temperature was 85℃, the adding time was 2h and the soaking time was 2.5h.

Key words: polycarboxylate based superplasticizer; allyl polyethylene glycol (JFB-23); cement paste fluidity

No related articles found!
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!