您的位置:山东大学 -> 科技期刊社 -> 《山东大学学报(理学版)》

《山东大学学报(理学版)》 ›› 2026, Vol. 61 ›› Issue (11): 1-11.doi: 10.6040/j.issn.1671-9352.0.2025.164

• •    下一篇

压电-光电协同诱导热载流子驱动CuS/MoS2异质结高效催化染料降解

王新昊,王栋,王继乾*   

  1. 中国石油大学(华东)化学化工学院, 山东 青岛 266580
  • 发布日期:2026-11-16
  • 通讯作者: 王继乾(1978— ),男,教授,博士,研究方向为纳米催化材料的制备与应用,以及表面活性剂在油田化学的应用. ;E-mail:jqwang@upc.edu.cn
  • 作者简介:王新昊(1999— ),男,博士研究生,研究方向为纳米催化材料的制备与应用. E-mail:3142089217@qq.com*通信作者:王继乾(1978— ),男,教授,博士,研究方向为纳米催化材料的制备与应用,以及表面活性剂在油田化学的应用. E-mail:jqwang@upc.edu.cn
  • 基金资助:
    国家自然科学基金资助项目(22072181)

Efficient catalytic degradation of dyes over CuS/MoS2 heterojunction driven by piezoelectric-photoelectric synergistic hot carriers

WANG Xinhao, WANG Dong, WANG Jiqian*   

  1. College of Chemistry and Chemical Engineering, China University of Petroleum(East China), Qingdao 266580, Shandong, China
  • Published:2026-11-16

摘要: 压电半导体与光电半导体的协同作用是实现高效有机染料降解的关键,而有效耦合力、光与热的多场效应则是提升该技术性能的核心。本研究采用一锅水热法合成具有压电-光电-光热三耦合性能的CuS/MoS2异质结。在催化过程中,小尺寸MoS2片层所产生的局部压电场显著促进光生电子-空穴对的分离与迁移;同时,光热效应所诱导的热载流子进一步加快活性位点处的氧化还原反应速率。这种多机制协同作用显著增强异质结的催化性能,从而实现对有机染料的高效协同催化降解。

关键词: CuS/MoS2, 小尺寸MoS2片层, 压电-光电-光热三耦合, 协同催化, 染料降解

Abstract: The synergistic effect of piezoelectric semiconductors and photovoltaic semiconductors is the key to achieving efficient degradation of organic dyes, and the effective coupling force and multi-field effects of light and heat are the core for improving the performance of this technology. In this study, a CuS/MoS2 heterojunction with piezoelectric-photoelectric-photothermal three-coupling properties was synthesized by one-pot hydrothermal method. During the catalytic process, the local piezoelectric field generated by the small-sized MoS2 layers significantly promoted the separation and migration of photogenerated electron-hole pairs; meanwhile, the hot carriers induced by the photothermal effect further accelerated the oxidation-reduction reaction rate at the active sites. This multi-mechanism synergy significantly enhanced the catalytic performance of the heterojunction, thereby achieving efficient synergistic catalytic degradation of organic dyes.

Key words: CuS/MoS2, MoS2 lamellae, piezoelectric-photoelectric-photothermal tri-coupling, synergistic catalysis, organic dye degradation

中图分类号: 

  • O614
[1] Chen P, Ni J M, Liang Y M, et al. Piezo-photocatalytic reduction of Au(I)by defect-rich MoS2 nanoflowers for efficient gold recovery from a thiosulfate solution[J]. ACS Sustainable Chemistry & Engineering, 2021, 9(1): 589-598.
[2] Chung Y J, Yang C S, Lee J T, et al. Coupling effect of piezo-flexocatalytic hydrogen evolution with hybrid 1T-and 2H-phase few-layered MoSe2 nanosheets[J]. Advanced Energy Materials, 2020, 10(42): 2002082.
[3] Liu Q, Zhan F Q, Luo H, et al. Mechanism of interface engineering for ultrahigh piezo-photoelectric catalytic coupling effect of BaTiO3@TiO2 microflowers[J]. Applied Catalysis B: Environmental, 2022, 318: 121817.
[4] Liu Q, Hu Q,Zhai D, et al. Superior photo-piezoelectric catalytic performance using Bi0.5Na0.5TiO3@BiVO4 based cloth[J]. Journal of Materials Chemistry A, 2021, 9(33): 17841-17854.
[5] Wu J, Qin N, Bao D H. Effective enhancement ofpiezocatalytic activity of BaTiO3 nanowires under ultrasonic vibration[J]. Nano Energy, 2018, 45: 44-51.
[6] Wei Y, Zhang Y W, Geng W, et al. Efficient bifunctional piezocatalysis of Au/BiVO4 for simultaneous removal of 4-chlorophenol and Cr(VI)in water[J]. Applied Catalysis B: Environmental, 2019, 259: 118084.
[7] Pan M L, Zhang C, Wang J, et al. Multifunctional piezoelectric heterostructure of BaTiO3@Graphene: decomplexation of Cu-EDTA and recovery of Cu[J]. Environmental Science & Technology, 2019, 53(14): 8342-8351.
[8] Feng W H, Yuan J, Zhang L L, et al. Atomically thin ZnS nanosheets: facile synthesis and superior piezocatalytic H2 production from pure H2O[J]. Applied Catalysis B: Environmental, 2020, 277: 119250.
[9] Duerloo K N, Ong M T, Reed E J. Intrinsic piezoelectricity in two-dimensional materials[J]. The Journal of Physical Chemistry Letters, 2012, 3(19): 2871-2876.
[10] Wu W Z, Wang L, Li Y L, et al. Piezoelectricity of single-atomic-layer MoS2 for energy conversion and piezotronics[J]. Nature, 2014, 514: 470-474.
[11] Cui C J, Xue F, Hu W J, et al. Two-dimensional materials with piezoelectric and ferroelectric functionalities[J]. npj 2D Materials and Applications, 2018, 2: 18.
[12] Chhowalla M, Shin H S, Eda G, et al. The chemistry of two-dimensional layered transition metal dichalcogenide nanosheets[J]. Nature Chemistry, 2013, 5(4): 263-275.
[13] Zhu H Y, Wang Y, Xiao J, et al. Observation of piezoelectricity in free-standing monolayer MoS2[J]. Nature Nanotechnology, 2015, 10(2): 151-155.
[14] Liu L, Liu X L, Jiao S L. CuS@defect-rich MoS2 core-shell structure for enhanced hydrogen evolution[J]. Journal of Colloid and Interface Science, 2020, 564: 77-87.
[15] Thuy U T D, Liem N Q, Parlett C M A, et al. Synthesis of CuS and CuS/ZnS core/shell nanocrystals for photocatalytic degradation of dyes under visible light[J]. Catalysis Communications, 2014, 44: 62-67.
[16] Chai Z Y, Pan X Z, Cui F, et al. Synthesis of 3D hierarchical CuS architectures consisting of 1D nanotubes for efficient photocatalysts[J]. Materials Letters, 2020, 275: 128168.
[17] Wang X H, Sun X Y, Liu W L, et al. Amino acid-mediated amorphous coppersulphide with enhanced photothermal conversion efficiency for antibacterial application[J]. Journal of Colloid and Interface Science, 2024, 657: 142-154.
[18] Liu Y Y, Lao Y J, Wang Y S, et al. Synergistic photothermal conversion in CuS-MoS2/poly(vinyl alcohol)sponge for efficient solar water evaporation[J]. Separation and Purification Technology, 2025, 359: 130860.
[19] Sharma K P, Shin M, Awasthi G P, et al. One-step hydrothermal synthesis of CuS/MoS2 composite for use as an electrochemical non-enzymatic glucose sensor[J]. Heliyon, 2024, 10(2): e23721.
[20] Shu S Z, Ling Q, Wang J N, et al. Carbon cloth-based meteorite-like Co-CuS/MoS2 heterostructure for efficient water electrolysis[J]. International Journal of Hydrogen Energy, 2024, 89: 264-271.
[21] Zhou X F, Shen B, Zhai J W, et al. High performance generation of H2O2 under piezophototronic effect with multi-layer In2S3 nanosheets modified by spherical ZnS and BaTiO3 nanopiezoelectrics[J]. Small Methods, 2021, 5(6): 2100269.
[22] Zhang Y H, Shen G D, Sheng C H, et al. The effect of piezo-photocatalysis on enhancing the charge carrier separation in BaTiO3/KNbO3 heterostructure photocatalyst[J]. Applied Surface Science, 2021, 562: 150164.
[23] Wei Y, Zhang Y W, Miao J, et al. In-situ utilization of piezo-generated hydrogen peroxide for efficient p-chlorophenol degradation by Fe loading bismuth vanadate[J]. Applied Surface Science, 2021, 543: 148791.
[24] Wang X H, Liu W L, Ma H Y, et al. Glutathione-mediated copper sulfide nanoplatforms with morphological and vacancy-dependent photothermal catalytic activity for multi-model tannic acid assays[J]. Journal of Colloid and Interface Science, 2024, 670: 460-472.
[25] Fan M H, Wang C H, Yu X, et al. MoS2 as a cocatalyst applied in advanced oxidation processes for enhancing degradation of organic pollutants: a review[J]. Tungsten, 2024, 6(3): 473-487.
[26] Wang Z Z, Zhong H, Zhu Z L, et al. Few-layer MoS2 nanosheets modified by PEG for enhanced piezoelectric catalysis degradation of carbamazepine[J]. Chemical Engineering Journal, 2024, 497: 154631.
[27] Tian J Q, Zhang Y Y, Shi Z H, et al. Enabling interfacial lattice matching by selective epitaxial growth of CuS crystals on Bi2WO6 nanosheets for efficient CO2 photoreduction into solar fuels[J]. Angewandte Chemie, 2025, 137(6): e202418496.
[28] Zhu M Y, Yu L J, Sha S M, et al. Highly efficient nanosized MoS2/MoP heterocatalyst for enhancing hydrogen evolution reaction over a wide pH range[J]. Sustainable Materials and Technologies, 2024, 41: e01090.
[29] Wang Y, Wang T,Arandiyan H, et al. Advancing catalysts by stacking fault defects for enhanced hydrogen production: a review[J]. Advanced Materials, 2024, 36(21): 2313378.
[30] Awual M R, Hasan M M, Islam A, et al. Introducing an amine functionalized novel conjugate material for toxic nitrite detection and adsorption from wastewater[J]. Journal of Cleaner Production, 2019, 228: 778-785.
[31] Bojarska Z, Mazurkiewicz-Pawlicka M, Gierlotka S, et al. Production and properties of molybdenum disulfide/graphene oxide hybrid nanostructures for catalytic applications[J]. Nanomaterials, 2020, 10(9): 1865.
[32] Cai R, Xiang H D, Yang D, et al. Plasmonic AuPt@CuS heterostructure with enhanced synergistic efficacy for radiophotothermal therapy[J]. Journal of the American Chemical Society, 2021, 143(39): 16113-16127.
[33] Mo S D, Song Y H, Lin M H, et al. Near-infrared responsive sulfur vacancy-rich CuS nanosheets for efficient antibacterial activity via synergistic photothermal and photodynamic pathways[J]. Journal of Colloid and Interface Science, 2022, 608: 2896-2906.
[34] Liu J, Cui E D, Zhang Q, et al. MoS2-based nanocomposites with high photothermal conversion efficiency for combinational photothermal/photodynamic tumor therapy[J]. Journal of Alloys and Compounds, 2024, 970: 172489.
[35] Chen L, Ren J T, Yuan Z Y. Enabling internal electric fields to enhance energy and environmental catalysis[J]. Advanced Energy Materials, 2023, 13(11): 2203720.
[36] Zhang Y K, Lin Y X,Duan T, et al. Interfacial engineering of heterogeneous catalysts for electrocatalysis[J]. Materials Today, 2021, 48: 115-134.
[37] Liang Z, Yan C F, Rtimi S, et al. Piezoelectric materials for catalytic/photocatalytic removal of pollutants: recent advances and outlook[J]. Applied Catalysis B: Environmental, 2019, 241: 256-269.
[38] Zhou X F, Wu S H, Li C B, et al.Piezophototronic effect in enhancing charge carrier separation and transfer in ZnO/BaTiO3 heterostructures for high-efficiency catalytic oxidation [J]. Nano Energy, 2019, 66: 104127.
[39] Yu D F, Liu Z H, Zhang J M, et al. Enhanced catalytic performance by multi-field coupling in KNbO3 nanostructures: piezo-photocatalytic and ferro-photoelectrochemical effects[J]. Nano Energy, 2019, 58: 695-705.
[40] Zhang A, Liu Z Y, Xie B, et al. Vibration catalysis of eco-friendly Na0.5K0.5NbO3-based piezoelectric: an efficient phase boundary catalyst[J]. Applied Catalysis B: Environmental, 2020, 279: 119353.
[41] Zhao Z C, Wei L Y, Li S, et al. Exclusive enhancement of catalytic activity in Bi0.5Na0.5TiO3 nanostructures: new insights into the design of efficient piezocatalysts and piezo-photocatalysts[J]. Journal of Materials Chemistry A, 2020, 8(32): 16238-16245.
[42] Xu X G, Lin X J, Yang F H, et al. Piezo-photocatalytic activity of Bi0.5Na0.5TiO3@TiO2 composite catalyst with heterojunction for degradation of organic dye molecule[J]. The Journal of Physical Chemistry C, 2020, 124(44): 24126-24134.
[43] Zhou X F, Sun Q W,Zhai D, et al. Excellent catalytic performance of molten-salt-synthesized Bi0.5Na0.5TiO3 nanorods by the piezo-phototronic coupling effect[J]. Nano Energy, 2021, 84: 105936.
[44] Wu T, Liu Z F, Shao B B, et al. Enhanced piezo-photocatalytic degradation of organic pollutants by cambered wall lamellar structure of porous tubular g-C3N4[J]. Nano Energy, 2024, 120: 109137.
[45] Wang S Y, Teng X M, Liu C, et al. Ultrafast piezo-photocatalytic degradation of dye pollutants using UiO-66-NH2(Hf)metal-organic framework-based nanoparticles[J]. Optical Materials, 2024, 147: 114758.
[46] Nguyen T L Y, To M D, Le M T, et al. Novel application of 2H-MoS2/g-C3N4 nanocomposite in piezo-catalytic degradation of Rhodamine B under ultrasonic irradiation[J]. Topics in Catalysis, 2024, 67(17): 1141-1154. 附录 1.1光热转换效率计算 根据我们先前报道的方法,计算出光热转换效率。其计算公式如下: η=(hs(Tmax-Tsurr)-Qloss)/(I(1-10-A(λ=808 nm))),(1) 其中,h表示热转换系数,s表示容器面积,Tmax和Tsurr分别代表系统的最高温度和环境温度,Qloss表示实验过程中系统的自身热损失,I表示激光密度,A表示在808 nm波长下的吸光度。式(1)中的hs是由以下公式推导得出: hs=(∑miCp,i)/(τs),(2) t=-τs ln θ,(3) θ=(Tx-Tsurr)/(Tmax-Tsurr),(4) 式(2)中,m和Cp分别代表质量和热容,而m和Cp的后缀“i”分别表示溶剂(水)或分散体(纳米颗粒)。式(3)中,t 表示激光关闭后系统的自然冷却时间。 从以上公式可以看出,τs可以由t与ln θ的函数斜率获得,从图4(d)中可以得出斜率为171.23,对于mi和Cp,i来说,由于纳米颗粒相比于水来说,所占的质量分数太少,因此忽略不计,故∑miCp,i的值即为Mwater(1×10-3 kg)×Cwater(4.2×103 J·kg-1·K-1)。此外,Tmax与Tsurr值分别为51.68 ℃和22 ℃,Qloss为向周围环境中损失的热能,Qloss=hsΔTwater,其中ΔTwater为纯水在光热过程中的温差值,由图4(b)得知ΔTwater=6.6 ℃。最后,式(1)中I的值为2 W·cm-2,而A(λ=808 nm)的值为0.314 9,最终计算出CuS/MoS2纳米材料的光热转换效率为54.48%。 1.2降解率计算 对于降解率的计算,其计算公式:降解率=Δc/c0A,其中c0A=c总-c吸附, Δc=c0-cx,如图6(a),吸附1 min时间后对应的c/c0值为0.51,因此c吸附=0.49, c0A=c总-c吸附=1-0.49=0.51,而催化降解2 min后,图6(a)表明cx=0.06,因此Δc= c0-cx=0.51-0.06=0.45。在不考虑吸附作用去除的部分染料,催化降解的降解率为Δc/c0A=0.45/0.51=88.24%。 1.3补充图 图S1CuS/MoS2异质结催化剂的TEM图 Fig.S1TEM image of CuS/MoS2 heterojunction catalyst图S2CuS/MoS2异质结催化剂的EPR谱图 Fig.S2EPR spectrum of CuS/MoS2 heterojunction catalyst 图S3CuS/MoS2异质结在808 nm激光(2 W/cm2)照射下的瞬态光电流图 Fig.S3Transient photocurrent diagram of the CuS/MoS2 heterojunction under 808 nm laser(2 W/cm2)irradiation 图S4CuS/MoS2-1、CuS/MoS2-2、CuS/MoS2、CuS/MoS2-3以及CuS/MoS2-4样品在超声(18 W, 50 kHz)与808 nm激光(2 W/cm2)同时作用时的RhB染料吸附-降解曲线 Fig.S4Adsorption-degradation curves of RhB dye on CuS/MoS2-1, CuS/MoS2-2, CuS/MoS2, CuS/MoS2-3 and CuS/MoS2-4 samples under the simultaneous action of ultrasound(18 W, 50 kHz)and 808 nm laser(2 W/cm2) 图S5CuS/MoS2-4异质结催化剂的SEM图 Fig.S5SEM image of CuS/MoS2-4 heterojunction catalyst 图S6CuS/MoS2异质结在808 nm激光(2 W/cm2)和超声(18 W, 50 kHz)同时作用下的降解循环图 Fig.S6Degradation cycle diagram of CuS/MoS2 heterojunc-tion under the simultaneous action of 808 nm laser(2 W/cm2)and ultrasound(18 W, 50 kHz)
[1] 王梅, 郭海玲, 刘晨光, 蔡大妮. 绿色调制协同法制备复合结构的Eu-MOF材料[J]. 山东大学学报(理学版), 2015, 50(01): 76-80.
[2] 封振宇, 包文亚, 张诗舒, 张俊彦, 张正林. ZnO/SnO复合纳米棒的水热合成及气敏研究[J]. 山东大学学报(理学版), 2014, 49(07): 18-22.
[3] 赵小菁,包 咪,金黎明,范圣第 . 卟啉-脂质体化合物P-GlyL的紫外可见及荧光光谱性质研究[J]. J4, 2007, 42(11): 6-10 .
[4] 于 江,李 宁,吴 霞,高希宝 . 嗅蛋白对铕纳米颗粒荧光增强效应的研究[J]. J4, 2008, 43(1): 20-23 .
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] 赵君1,赵晶2,樊廷俊1*,袁文鹏1,3,张铮1,丛日山1. 水溶性海星皂苷的分离纯化及其抗肿瘤活性研究[J]. J4, 2013, 48(1): 30 -35 .
[2] 孙小婷1,靳岚2*. DOSY在寡糖混合物分析中的应用[J]. J4, 2013, 48(1): 43 -45 .
[3] 罗斯特,卢丽倩,崔若飞,周伟伟,李增勇*. Monte-Carlo仿真酒精特征波长光子在皮肤中的传输规律及光纤探头设计[J]. J4, 2013, 48(1): 46 -50 .
[4] 杨伦,徐正刚,王慧*,陈其美,陈伟,胡艳霞,石元,祝洪磊,曾勇庆*. RNA干扰沉默PID1基因在C2C12细胞中表达的研究[J]. J4, 2013, 48(1): 36 -42 .
[5] 冒爱琴1, 2, 杨明君2, 3, 俞海云2, 张品1, 潘仁明1*. 五氟乙烷灭火剂高温热解机理研究[J]. J4, 2013, 48(1): 51 -55 .
[6] 李永明1, 丁立旺2. PA误差下半参数回归模型估计的r-阶矩相合[J]. J4, 2013, 48(1): 83 -88 .
[7] 任敏1,2,张光辉1. 右半直线上依分布收敛独立随机环境中随机游动的吸收概率[J]. J4, 2013, 48(1): 93 -99 .
[8] 张京友,张培爱,钟海萍. 进化图论在知识型企业组织结构设计中的应用[J]. J4, 2013, 48(1): 107 -110 .
[9] 程李晴1,2, 石巧连2. 一种新的混合共轭梯度算法[J]. J4, 2010, 45(6): 81 -85 .
[10] 郭兰兰1,2,耿介1,石硕1,3,苑飞1,雷丽1,杜广生1*. 基于UDF方法的阀门变速关闭过程中的#br# 水击压强计算研究[J]. 山东大学学报(理学版), 2014, 49(03): 27 -30 .